Whether it is a new house decoration or an old room decoration，Many people say that the hydropower part is the most difficult to start.。Because of the current room design，basically， All hydropower lines can be covered only some old houses will choose to move the production line to a particularly obvious place.。For the beautiful house will hide the lines in the house and the wall，Dismiss， All the cars have been repositioned before the house is renovated。
It seems to be more comfortable，But when you need to have a big repair on the house，Or when there is a problem，When you need to do article on the wall，however， While ensuring that the line is not damaged，It is difficult to judge whether it can start construction。therefore，Today I will discuss the problem of hydropower construction。
About the most common problem of waterway is the connection of water pipes。Cannot be sluggish when connecting，Some people want to save costs，therefore， Construction rules are not followed in the direction of the waterway。E.g， Do not parallel，Free front line，Form an angle。This does not meet the regulations，Simultaneously， It will affect the life of the waterway。Simultaneously， Waterway must be careful，To avoid water，To avoid leakage and electric shock。The most useful thing to change the direction of the water pipe is the elbow。Usually90The intension is necessary for this thing.，Do not manually bend the water pipe to change the direction in order to save costs.。This damage to the water pipe will affect the use.。
Another point is the laving of waterways，I often see what if I don't do water in the Internet.，I think it is because the water pipe is laid underground.。Water pipe ruptures and see 易彤破壁机维修点 water，But you can't find a problem.。Repair is also very troublesome。Whether the pipeline passes through the ceiling or underground？About the laying of this waterway，I personally think you can try not to place it underground.。Climbing seems more reasonable，just in case。
Circuit，I remember that I want to bind the background wall decoration to the wall to add a little artistic charm.。as a result， He does not dare to do。Because there is wire on the wall，I am afraid to hit it.。So what should I do if I encounter such questions?？
How to detect circuit failures on the wire？When installing wires at home，Some people participate，therefore，About the layout of the line is very clear，This avoids these problems。When you don't know anything, there is a way now there is a detector.，It should be available online，It can detect circuitry，therefore，When you want to reshape the wall，You can find the laving line，This prevents damage to the wire。
Will definitely ask the wire：What should I do if there is a problem?？The most important thing is to find out the cause，About this question，What I want to say is，inDecorationHouse，Must check the wires。Since the circuit that cannot guarantee the use of the developer is good or bad，Then you have to live in the quality of the production line must be guaranteed，BestowDecorationReplace it before，in this way， The possibility of follow-up issues will be greatly reduced。When the circuit design has problems， You can check the reason，Replace the socket to detect if there is a problem，If the rule is an electrical problem，You can check if it is a socket problem，if not， The specific part of the line may have problems。at this time， You better find professional examinations and repair。
The above is actually only some of the common problems in the waterway.。The refurbishment of the water is a very large project。There are also many places that you have to pay attention to throughout the conversion process.。E.g， Line directional materials and obstacles are something to pay attention to。Because after all Line inside the wall，therefore，If you find a problem later， It's hard to solve。
