您好,欢迎访问破壁机维修中心!

优秀品牌

百年故事

质量保障

原故障报修90天

使用年限

高出平均寿命30%

全国咨询热线

400-668-6726

易彤破壁机维修网点_易彤料理机服务电话400-668-6726
您的位置:主页 > 新闻动态 >

新闻动态

联系我们

地址:北京市海淀区田村3号楼

咨询热线:

400-668-6726

15726676726

易彤料理机修理作指南

发布时间:2021-12-04 00:09人气:
易彤料理机修理作指南

  Precautions when using an inductor

  The induction cooker is a new type of kitchen stove,Because it can process food,Steam, Fried Fried Frying it has the advantages of energy saving, High heat efficiency Cleanliness Convenient and durable Wait for many families。But to truly use the induction cooker,Become a good helper in the kitchen,Please pay attention to the following when using an inductor。

  1。The power cord must meet the requirements。High power due to the induction cooker,When configuring the power cord,You should choose to bear15ACurrent copper core wire,Access sleeve plug switch, and many more Always meet this requirement。Apart from this,Induction cooker Big current will heat or burn wire and socket。In addition,if possible,It is best to install fuse box on the power cord outlet,Ensure safety。

  2。Put away。Place the desktop of the induction cooker should be flat,Especially when you eat hot pot on the table You should pay more attention。If the desktop is not flat,Hang a foot of the induction in the air,The gravity of the pot during use will force the furnace to deform or even damage。In addition,If the desktop is tilted,When the electromagnetic furnace is heated,The slight shock caused by the pot is also easy to drive the pot and cause danger.。

  3。Ensure that the air is smooth。The induction cooker in the work will become higher as the temperature of the pot.。therefore。When you put an electromagnetic furnace in the kitchen, you should ensure that there is no obstacle at the inlet and exhaust port of the furnace.。Do not put the item or liquid that may damage the induction cooker(Stack)Side or furnace。Need to remind,Induction cooker, If the built-in fan is not rotated,To stop immediately,And timely maintenance。

  4。Don't be too heavy in pots。The induction cooker is different from the stove made of materials made of brick or iron.。Its load weight is limited,usually, Food with a pot bowl of scoop should not exceed5kg。Don't be too small in the bottom of the pot,The pressure of the surface of the inductor is not too heavy or too concentrated.。If you need to heat overweight and oversized pots,Support for the pot,Then insert the motor into the bottom of the pot。

  5,Must clean the stove。The induction cooker is the same as other appliances。Pay attention to waterproof moisture during use,And avoid contact with harmful liquids。Do not put the electromagnetic furnace into the water or flush directly with water.。You cannot use a solvent or gasoline to clean the surface or subject of the furnace。In addition,Do not use metal brush, Wipe the oil on the surface of the furnace with diamond cloth and other hard tools。Can use the soft cloth of the water to remove the dirt。If you are oily, you can use a soft cloth with a small amount of low concentration cleaners.。Do not use cold water to wipe the surface of the stove surface。To avoid oil stain on the surface of the furnace or in the furnace,Reducing the workload of cleaning induction cooker,When using an induction cooker You can put a slightly large paper with a fire furnace, For example, waste newspaper, Surface of the furnace。in this way, It can absorb overflowed water, Oil and other dirt in the pan,Please discard the paper after use。

  6。The protection function of the detection furnace must be intact。Electromagnetic furnace has good automatic detection and self-protection,It can detect stovetime equipment(Whether it is a metal furnace), Is it properly used?, And whether the furnace temperature is too high。For example, induction furnaces lose these functions,Very dangerous use of the induction cooker。

  7。Extremely press the button。The button of the induction cooker is a touch,Do not use it too much,Click to click。After pressing the button,The finger should leave not to lower it to avoid damage to the reed and conductive contact piece.。

  8。When the surface of the furnace is damaged,Please stop using。The surface of the induction cooker is a crystalline ceramic plate,It's fragile。

  

  How to deal with dragonfly in the inductor

  If there is a cockroach in the inductor,May cause linear paralysis, Motherboard damage。therefore,To use special cleaners to repeatedly clean the motherboard,It is 易彤料理机维修 best to put some peony in the corner of the machine after cleaning.,Prevent motherboards from short-term。

上文就是为大家讲的易彤料理机修理作指南了。

本文地址:http://www.josia.cn/a/xinwendongtai/1292.html

推荐资讯