您好,欢迎访问易彤破壁机售后维修中心!

优秀品牌

百年故事

质量保障

原故障报修90天

使用年限

高出平均寿命30%

全国咨询热线

400-668-6726

易彤破壁机维修_易彤料理机售后服务400-668-6726
您的位置:主页 > 新闻动态 >

新闻动态

联系我们

地址:北京市海淀区田村3号楼

咨询热线:

400-668-6726

15726676726

易彤破壁机故障代码灶具知识小百科

发布时间:2022-11-24 00:13人气:
易彤破壁机故障代码灶具知识小百科

  1。 How many batteries are used in general stovers?How many sections have been used?

  General useAAbattery,1It's enough to use it.AABattery model,need4Part。

  2。 How to maintain the stove?

  Cold stove plate:

  ①Wipe with hot wipes on the furnace panel5minute,Spray 易彤破壁机售后维修 warm water and neutral detergent on the surface of the furnace。

  ②Use the dosage powder and edible soda powder(Granular,Friction occurs when using,More easily clean up),Perform up or down or left(Stainless steel countertop should be arranged in the texture direction),Do not circulate clean。Do not use the surface of the cooker to clean the induction cooker,Scratches are easy to appear; Be careful not to clean when cleaning; Use a neutral detergent as a detergent,Avoid damage to strong acid and strong alkali detergents。

  Heat stove:

  ①Spray neutral cleaning agent

  ②Use to dirt and eat soda powder(granular,Friction occurs when using,More easily clean up),Perform up or down or left(Stainless steel countertop should be arranged in the texture direction),Do not circulate clean。

  3。 Why is the gas stove flourished??Is the gas cooker showing off normal??

  The prosperous gas stove is mainly due to the following reasons.:

  ①Gas reasons:When the moisture or impurities in the combustion gas is too much,Will make the flame color becomes red。

  ②Dust reasons:When there is dust or cooking in the room, Increased moisture and gas in the air,Easy prosperity。

  ③Cause of a pot stand:The enamel will be red in the pan rack at high temperature heating.,Due to the special material of enamel, The flame around the pan is red。This is the color of metal ions at high temperatures。

  therefore,Red fire when burning is not a problem。Is caused by the above reasons,Will not affect normal use,It does not endanger human health。

  4。 What is a back fire??Why does the gas stove flash back??

  The refurbance means the flame burns to the interior of the burner,Even burning to the damper。And often accompanying“ chichi”Burning sound。 If you can't find and stop in time,This may cause burning or valve body burning on the surface of the stove.。

  The reason for the flashback:

  ①Fire-free hole clogging:Due to different gas degrees, There will be some impurity gas stoves have been used for a long time.,Dirt is deposited in the fire hole of the fire hood,Shrink fire hole,If the gust or water pressure,Leading the flame back,Then it is appropriate to avoid this situation,Use a period of time to clean the fire hole in time。

  ②When the flame cover of the burner is not tight or the air door is large,It is also easy to change back。therefore,The correct solution when the flash is flashing is:Shut down the stove,Adjust the valve。

  5, Why is the flameout protection furnace need to stay for a period of time??

  The flameout protection furnace feels the change in external heat by fixed the thermocouple next to the fire hood.。Make sure that accidental flameout occurred,Gas stove can automatically cut the gas source,Thus guarantees people's safety。Thermocouple has two effects in terms of flameout protection:on the one hand:It ensures that the gas source is cut in a short time in the short time in the case of accidental flameout.;Thermocouple can only feel the heat of the outside world.,In order to smooth the ventilation tube,International regulations are15second,But Shuaikang gas stove adopts the world's most advanced temperature sensing device,Control this time5Seconds or so。

  

  6。 How long is the start time of Shuaikang stove?(Time to turn off the flame to close the gas source)

  National standard45Within a second; Shuaikang cookware is usually15-20Close the air source within seconds。

  7。 Let the cookware flameout,what is the reason?

  ①After the switch is pressed,Lysterapening is not long enough,Leading to let go of fire,Suggest5Press the switch after seconds

  open(National standard is15second); Or pressing insufficient valve body shaft handle is not in place。

  ②Whether the timing device is in an open position,You can rotate the timer switch first90degree(30minute),Then adjust it back to close position,Just hear“Ding”the sound of;

  ③Whether the fire cover is flat,If the fire is not flat,Put the fire cover flat;

  ④Whether the fire hole corresponding to the thermocouple is blocked,If, Dredging;

  ⑤The tip of the thermocouple has dirt,Please wipe with a dry soft cloth or paper towel.。

  8。 Furnace can't be fire,what is the reason?

  ①Check if the gas source valve opens;

  ②If the user's eyes do not have a pulse(Ignition),It can be determined that the battery is exhausted,It is recommended to replace the battery first.。

  ③If you can fire,Possible reason is:A. Whether the fingers corresponding to the ignition needle pass,Or discharge needle is not aligned with the fire hole,Whether the fire cover is flat; B. Whether the discharge needle is tidy or damaged; C。 Micro switch is damaged; D. Too big。

  There is also a situation:Tattoo may not have gasoline or no electricity。

  ①General gas or pipeline gas source,Use prepaid card,Check if the recharge card still has the amount of gasoline available。

  ②After the user is charging,Gas meter shows gas but still unavailable users to refresh gas table。

  ③Not normal,It is recommended that the user checks if the battery on the gas table is still charging.。

  9。 How much is the general service life of a battery??

  usually,Replacing new batteries requires six months to one year。This depends on the usage and frequency。

  10。 How to replace the battery of the stove?

  first of all, If you are a built-in stove, you need to take the cookware from the countertop.。Some stoves have compression devices。I am mistaken to be taken away,Lift the cookie,If you can reach you, you can then adjust the pressing device from the position perpendicular to the stove to a position parallel to the stove,You can take the cookware from the countertop。

  If there is a lid on the battery case(Color for black and white,There is an arrow above),Remove the cover in the direction indicated by the arrow,If there is no cover,Battery can directly see the installation of the battery,Please pay attention to the positive and negative electrode of the battery。

上文就是为大家讲的易彤破壁机故障代码灶具知识小百科了。

本文地址:/a/xinwendongtai/1432.html

推荐资讯